REGULATION - THE LEGAL BIT

Portable Appliance Testing (PAT) – three words that every Facilities/Office  Manager will be very familiar with, but what is your legal responsibility?

The Electricity at Work Regulations 1989 is the legislation which places legal implications on employers to ensure the safe use of electricity in the workplace. The regulations dictate that all portable equipment must be kept in a condition which is safe for use. The regulations:

"As may be necessary to prevent danger, all systems shall be maintained so as to prevent, so far as is reasonably practicable, such danger (Regulation 4(2)). 'System' means an electrical system in which all the electrical equipment is, or may be, electrically connected to a common source of electrical energy and includes such source and such equipment (Regulation 2(1)). Electrical equipment includes anything used, intended to be used or installed for use, to generate, provide, transmit, transform, rectify, convert, conduct, distribute, control, store, measure or use electrical energy (Regulation 2(1))."

This combined with the Health and Safety at Work etc. Act 1974 and the Provision and Use of Work Equipment Regulations 1998 makes clear that the regulations apply to all electrical equipment used in, or associated with, places of work. The scope covers everything from distribution systems, be they 400 kV to pieces of electrical equipment like a hairdryer!

 

FREQUENTLY ASKED QUESTIONS

WHO IS RESPONSIBLE?

The Code of Practice for In-Service Inspection and Testing of Electrical Equipment states that everyone in work has their responsibilities including, in certain circumstances, trainees.


However, this does not reduce the duties of particular persons. Regulation 3 of the Electricity at Work Regulations recognises a responsibility (control) that employers and many employees have for electrical systems.

The Provision and Use of Work Equipment Regulations 1998 says they require every employer to ensure equipment is maintained in good order (Reg 5) and inspected as necessary to ensure it is maintained in a safe condition (Reg 6).

DO I NEED TO TEST NEW EQUIPMENT?

New equipment is normally supplied in a safe condition and therefore should not require a formal portable appliance inspection or test. However, a visual check is recommended to ensure the item is not damaged or dangerous.

BUT WHY SPEND TIME AND MONEY ON TESTING?

The numbers speak for themselves:

  • 350,000 serious injuries every year are caused by electrical accidents

  • 1,000 accidents in workplaces every year involve electric shock or burns (reported to the Health & Safety Executive)

  • 30 (on average) are fatal

  • 4,000 accidental fires in commercial, business and public (non-residential) buildings in 2011/12 were caused by faulty appliances and leads

  • 80% of faulty electrical products are never returned

 

AMC Services and PAT Testing

07568 078 676

Byfield, Northamptonshire

©2020 by A.M.C Pat Testing. Proudly created with Wix.com

This site was designed with the
.com
website builder. Create your website today.
Start Now